DFM Series Guide Rod Aluminum Air Silinda Tubes
DFM Jerin Zane
| NO | d | d1-2 | A | B | C | D | E |
| 1 | φ12 | φ11.5 | 60 | 41 | 28 | 10 | - |
| 2 | φ16 | φ13 | 67 | 46 | 32 | 8.1 | - |
| 3 | φ20 | φ15.5 | 83 | 58 | 36 | 10 | - |
| 4 | φ25 | φ17.5 | 95 | 68 | 44 | 10 | - |
| 5 | φ32 | φ20 | 110 | 78 | 49 | 10 | - |
| 6 | φ40 | φ22.5 | 120 | 88 | 54 | 13.5 | - |
| 7 | φ50 | φ27.5 | 148 | 110 | 64 | 16 | 40.5 |
| 8 | φ63 | φ27.5 | 162 | 125 | 78 | 13.5 | 42 |
Material na Aluminum Alloy Profile Aluminum pneumatic Silinda bututu: aluminum gami 6063 T5
Madaidaicin Tsayin mu shine 2000mm, idan kuna buƙatar sauran tsayi, da fatan za a sanar da mu da yardar kaina.
Anodized surface: Ciki tube-15± 5μm Outer tube-10± 5μm
Yarjejeniyar ƙira FESTO, SMC, Airtac, Chelic da sauransu.
Daidaita daidaitaccen ISO 6430 ISO6431 VDMA 24562 ISO15552 da sauransu.
Ana amfani dashi don daidaitaccen Silinda, ƙaramin Silinda, ƙaramin Silinda, Dual Rod Silinda, Silinda Slide Silinda, Silinda na Slide, Gripper da dai sauransu Har ila yau, don wasu na'urori na musamman.
Haɗin Kemikal:
| Haɗin Sinadari | Mg | Si | Fe | Cu | Mn | Cr | Zn | Ti |
| 0.81 | 0.41 | 0.23 | <0.08 | <0.08 | <0.04 | <0.02 | <0.05 |
Bayani:
| Ƙarfin Tashin Hankali (N/mm2) | Ƙarfin Haɓaka (N/mm2) | Ƙarfafa (%) | Taurin Sama | Daidaiton Diamita na Ciki | Tashin Ciki | Madaidaici | Kuskuren Kauri |
| shafi 157 | Farashin 0.2108 | S8 | HV 300 | H9-H11 | <0.6 | 1/1000 | ± 1% |
Tolerancen Aluminum Alloy Tube:
| WUTAR ALUMIUM ALLOY TUBE | ||||||
| Girman Bore | HAKURI | |||||
| mm | H9(mm) | H10 (mm) | H11 (mm) | |||
| 16 | 0.043 | 0.07 | 0.11 | |||
| 20 | 0.052 | 0.084 | 0.13 | |||
| 25 | 0.052 | 0.084 | 0.13 | |||
| 32 | 0.062 | 0.1 | 0.16 | |||
| 40 | 0.062 | 0.1 | 0.16 | |||
| 50 | 0.062 | 0.1 | 0.16 | |||
| 63 | 0.074 | 0.12 | 0.19 | |||
| 70 | 0.074 | 0.12 | 0.19 | |||
| 80 | 0.074 | 0.12 | 0.19 | |||
| 100 | 0.087 | 0.14 | 0.22 | |||
| 125 | 0.1 | 0.16 | 0.25 | |||
| 160 | 0.1 | 0.16 | 0.25 | |||
| 200 | 0.115 | 0.185 | 0.29 | |||
| 250 | 0.115 | 0.185 | 0.29 | |||
| 320 | 0.14 | 0.23 | 0.36 | |||
FAQ:
Q1: Menene samfurin DFM? A: ☆ Ma'aunin FESTO ne.Girman guntun daga Dia12mm zuwa Dia100mm.
Bayani:☆ Tuƙi da jagora a cikin gida guda
☆Babban juriya ga magudanar ruwa da na gefe
☆ Jagorar ɗaukar ƙwallo a fili ko mai juyawa
☆ Faɗin nau'ikan hawa da zaɓuɓɓukan haɗe-haɗe
☆ Faɗin bambance-bambancen don aikace-aikacen da aka keɓance
Q2: Idan muka saya DFM, yana yiwuwa tare da anodizing ga Aluminum 6063 T5 Silinda Tube?
A: Wannan Silinda na Pneumatic Ba a ba da shawarar ya zama oxidized ba, saboda abokin ciniki yana buƙatar yanke shi da kansa sannan ya sarrafa shi sannan ya yi maganin oxygen bayan siyan shi.
Q3: Menene tsawon idan muka yi odaFitar Aluminum Don Masu Silinda na Pneumatic?
A: Tsawon shine mita 2.
Q4: Samfurin DFM
A.Ya dace da matsawa, ɗagawa da tsayawa aikace-aikace.
Q5: Whulashine lokacin bayarwagame da Bayanin Aluminum Don Silinda na iska?
A: ☆Idan musamman tubes, lokaci bukatar 50-60 aiki kwanaki, amma idan ga misali shambura, mu isar lokaci ne 15-20 aiki kwanaki.
