TCM-A/TCM-B SERIES JAGORAN ROD CHINA ALUMIUM ALLOY TUBE

Takaitaccen Bayani:

SMC Nau'in TCM Series Jagoran Tube Pneumatic Silinda
Ma'aunin SMC ne.Girman guntun daga Dia12mm zuwa Dia100mm
Tsawon shine mita 2.

Nemi Sabon Farashin Mu

Cikakken Bayani

Tags samfurin

TCM-A (φ12-80) Series Silinda Tube

No	d	d1-2	A	B	C	D	E
1	φ12	φ10	58	41	37	9	26
2	φ16	φ12.5	64	46	38	10.5	30
3	φ20	φ14.5	83	54	44	12.5	36
4	φ25	φ18	93	64	50	15	42
5	φ32	φ22.5	112	78	63	19.5	48
6	φ40	φ22.5	120	86	72	25	54
7	φ50	φ27.5	148	110	92	33	64
8	φ63	φ27.5	162	124	110	34	78
g	φ80	φ34	202	156	140	48	91.5

TCM-B (φ12-63) Jerin Silinda Tube

NO	d	2-d1	A	B	C	D	E
1	φ12	φ10	58	41	37	9	26
2	φ16	φ13	64	46	38	10.5	30
3	φ20	φ17	83	54	44	12.5	36
4	φ25	φ18	93	64	50	15	42
5	φ32	φ22.5	112	78	63	19.5	48
6	φ40	φ22.5	120	86	72	25	54
7	φ50	φ27	148	110	92	33	64
8	φ63	φ27	162	124	110	34	78

Material na Aluminum Alloy Profile Aluminum pneumatic Silinda bututu: aluminum gami 6063 T5

Madaidaicin Tsayin mu shine 2000mm, idan kuna buƙatar sauran tsayi, da fatan za a sanar da mu da yardar kaina.
Anodized surface: Ciki tube-15± 5μm Outer tube-10± 5μm
Yarjejeniyar ƙira FESTO, SMC, Airtac, Chelic da sauransu.
Daidaita daidaitaccen ISO 6430 ISO6431 VDMA 24562 ISO15552 da sauransu.
Ana amfani dashi don daidaitaccen Silinda, ƙaramin Silinda, ƙaramin Silinda, Dual Rod Silinda, Silinda Slide Silinda, Silinda na Slide, Gripper da dai sauransu Har ila yau, don wasu na'urori na musamman.

Haɗin Kemikal:

Haɗin Sinadari	Mg	Si	Fe	Cu	Mn	Cr	Zn	Ti
Haɗin Sinadari	0.81	0.41	0.23	<0.08	<0.08	<0.04	<0.02	<0.05

Bayani:

Ƙarfin Tashin Hankali (N/mm2)	Ƙarfin Haɓaka (N/mm2)	Ƙarfafa (%)	Taurin Sama	Daidaiton Diamita na Ciki	Tashin Ciki	Madaidaici	Kuskuren Kauri
shafi 157	Farashin 0.2108	S8	HV 300	H9-H11	<0.6	1/1000	± 1%

Tolerancen Aluminum Alloy Tube:

WUTAR ALUMIUM ALLOY TUBE
Girman Bore	HAKURI
mm	H9(mm)		H10 (mm)		H11 (mm)
16		0.043		0.07		0.11
20		0.052		0.084		0.13
25		0.052		0.084		0.13
32		0.062		0.1		0.16
40		0.062		0.1		0.16
50		0.062		0.1		0.16
63		0.074		0.12		0.19
70		0.074		0.12		0.19
80		0.074		0.12		0.19
100		0.087		0.14		0.22
125		0.1		0.16		0.25
160		0.1		0.16		0.25
200		0.115		0.185		0.29
250		0.115		0.185		0.29
320		0.14		0.23		0.36

FAQ:

Q1: Menene samfurin TCM?

A: Siffar samfur
1. An aiwatar da ma'aunin JIS
2. Ana amfani da jagororin jagorori na musamman na ƙarfe mai ɗaukar nauyi da linzamin linzamin kwamfuta ko jagorar tagulla don hana juyawa.Suna iya ɗaukar babban ƙarfin juyi da nauyin radial.
3. Naúrar tuƙi da naúrar jagora suna cikin ganga ɗaya wanda ba a buƙatar ƙarin kayan haɗi tare da ƙaramin sarari da ake buƙata Ciwon iska yana da zaɓi kuma yana dacewa don shigarwa.
4. Ƙarƙashin ƙasa, gefen baya da gyaran gyare-gyare na babban jiki bi da bi yana da daidaitattun matakan daidaitawa guda biyu (Dubi PA orifice da ma'auni a cikin XX batu), wanda zai iya samar da shigarwar daidaitawa tare da madaidaicin daidaitaccen yanayi na musamman.
5. Zaɓuɓɓuka na haɓakawa na canzawa tare da tanadin 4 masu haɓakawa.
6. Zane na musamman na babban jiki yana ba da dutse mai yawa;

Q2: Idan muka sayi TCM, yana yiwuwa tare da anodizing don Aluminum Air Silinda Tubes?
A: Wannan Silinda na Pneumatic Ba a ba da shawarar ya zama oxidized ba, saboda abokin ciniki yana buƙatar yanke shi da kansa sannan ya sarrafa shi sannan ya yi maganin oxygen bayan siyan shi.

Q3: Menene tsawon idan muka yi oda Pneumatic Silinda Tube Pipe?
A: Tsawon shine mita 2.

Q4: Whulashine lokacin bayarwagame da Bayanin Aluminum Don Silinda na iska?
A: ☆Idan musamman tubes, lokaci bukatar 50-60 aiki kwanaki, amma idan ga misali shambura, mu isar lokaci ne 15-20 aiki kwanaki.